---
title: "iPad Air 11-inch (M3) Battery Replacement Guide | UWS"
description: "iPad Air 11-inch (M3) Battery Replacement guide with preparation, tools, illustrated repair resources, reassembly and functional checks. Get help from UWS in Tustin."
canonical: https://ultimatewirelesssolutions.com/repair-guides/apple/ipad-air-11-m3/battery-replacement
---

Ultimate Repair Hub · DIY Guide

# iPad Air 11-inch (M3) Battery Replacement

Use this guide for replacement of a worn or faulty battery. Rule out a bad charger and software-related drain first, and back up the device before opening it.

[Check Parts Availability](https://ultimatewirelesssolutions.com/repair-parts?brand=apple&model=ipad-air-11-m3)[Book Professional Repair](https://ultimatewirelesssolutions.com/appointment)[Request Quote](https://ultimatewirelesssolutions.com/get-a-quote)

Difficulty

Advanced

Repair sequence

6 steps

Final checks

4 checks

Opens from

Display

1.  [Home](https://ultimatewirelesssolutions.com/) ›
2.  [DIY Repair Guides](https://ultimatewirelesssolutions.com/repair-guides) ›
3.  [Apple iPad](https://ultimatewirelesssolutions.com/repair-guides/ipad) ›
4.  [iPad Air 11-inch (M3)](https://ultimatewirelesssolutions.com/repair-guides/apple/ipad-air-11-m3) ›
5.  Battery Replacement

## Tools

-   Exact model’s repair tray, opening fixture and adhesive alignment equipment
-   ESD-safe tweezers and nylon probe
-   Specified screwdriver bits and torque drivers
-   Fresh model-specific adhesive, tapes, foams and replacement screws
-   Adhesive activation roller; eye protection and appropriate gloves

## Parts and supplies

Confirm the replacement part and the source's complete supply list for your exact model and Wi-Fi or cellular variant before starting.

Display adhesive is normally replaced after opening. Follow the source's requirements for screws, tape, foam and calibration.

## Table of contents

1.  [1. Before you begin](#prepare)
2.  [2. Repair sequence](#steps)
3.  [3. Illustrated resources](#walkthrough)
4.  [4. Final checks](#checks)

## Before you begin

Confirm the model in Settings → General → About and match the screen size and Wi-Fi or cellular version. A similar-looking iPad can have different cables, screws and replacement parts.

[Identify your iPad with Apple](https://support.apple.com/en-us/108043)

Battery and glass precautions

Back up your data and disconnect all accessories. Follow the selected source's discharge and power-isolation instructions before opening. A swollen, dented, punctured or unusually hot battery needs specialist handling; do not heat, bend or pry it. Protect your eyes from broken glass. Power down before adjusting an internal connection.

[Apple battery safety and workspace setup](https://support.apple.com/en-us/121828)

## Repair sequence

Use the linked Apple illustrations alongside the sequence below. They specify the screw map, tool settings, cable routing and adhesive placement. The complete removal and reassembly procedure opens on Apple Support.

1.  1
    
    ### Open the device
    
    Fully discharge the battery and complete the linked display-removal procedure first. Stop if the cell is damaged.
    
    Display connection locations for accessApple diagram 1 of 1
    
    ![iPad Air 11-inch (M3) — Battery: Display connection locations for access (apple diagram)](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ipad/122094/122094_Dspl_Flexes_In_2.png)
    
    Display connection locations for access
    
2.  2
    
    ### Release the battery
    
    Remove the battery-connector screw. Stretch-release all four adhesive strips using the order and pull direction in Apple’s diagram. Keep tweezers away from the cell pouch.
    
    Battery adhesive locations and release orderApple diagram 1 of 2
    
    ![iPad Air 11-inch (M3) — Battery: Battery adhesive locations and release order (apple diagram)](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ipad/122095/122095_Batt_Adhesive_Order.png)
    
    Battery adhesive locations and release order
    
3.  3
    
    ### Handle broken adhesive safely
    
    Retrieve an accessible broken tab carefully. If a strip cannot be retrieved, use only the insertion points pictured by Apple where adhesive has already been removed; never force a tool underneath the cell.
    
    Broken adhesive: permitted access pointsApple diagram 1 of 1
    
    ![iPad Air 11-inch (M3) — Battery: Broken adhesive: permitted access points (apple diagram)](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ipad/122095/122095_Batt_Adhesive_Broken.png)
    
    Broken adhesive: permitted access points
    
4.  4
    
    ### Prepare and fit a new battery
    
    Remove the released battery. Clear loose parts and old adhesive from the enclosure without wetting flex cables or foam pads. Keep the new battery’s upper protective cover in place while aligning and seating its connector.
    
    Replacement battery alignmentApple diagram 1 of 1
    
    ![iPad Air 11-inch (M3) — Battery: Replacement battery alignment (apple diagram)](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ipad/122095/122095_Batt_Align.png)
    
    Replacement battery alignment
    
5.  5
    
    ### Secure the battery
    
    Fit the specified new connector screw with the green 0.45 kgf·cm driver. Activate each adhesive strip with the roller as illustrated; avoid the protected areas. Remove the protective cover.
    
    Battery adhesive activationApple diagram 1 of 1
    
    ![iPad Air 11-inch (M3) — Battery: Battery adhesive activation (apple diagram)](https://cdsassets.apple.com/live/SZLF0YNV/service-documentation/ipad/122095/122095_Batt_Adhesive_Hand_Roller.png)
    
    Battery adhesive activation
    
6.  6
    
    ### Reassemble and charge
    
    Refit the display using fresh adhesive. Check that the battery is secure, charge briefly, then perform the tests below. A loose battery requires reopening and replacement as directed by Apple.
    

## Illustrated repair resources

Apple Support · official illustrated instructions

### iPad Air 11-inch (M3) — Battery

Keep the full illustrated procedure open while working. Follow its numbered diagrams, variant-specific branches, screw specifications and reassembly notes. These original diagrams are provided on Apple's website.

[Open the illustrated battery replacement procedure](https://support.apple.com/en-us/122095)[Open the required display-removal procedure](https://support.apple.com/en-us/122094)[Exact-model tools and fixtures](https://support.apple.com/en-us/122093)[Complete Apple repair manual](https://support.apple.com/en-us/122091)

## Final checks

Use this checklist after reassembly. These checkboxes are a working aid and reset when you leave the guide.

Confirm that the iPad starts and the battery percentage rises on a known-good charger.Check standby and normal-use behavior for unexpected shutdowns or unusual heat.Inspect the display perimeter: it must sit flush without battery pressure or a loose battery inside.Test touch, cameras, speakers, microphones and original biometric function after reassembly. Recycle the removed battery through an appropriate battery collection service.

## Prefer a professional repair?

Get help with diagnosis, parts compatibility or installation.

[Book Professional Repair](https://ultimatewirelesssolutions.com/appointment)[Request Quote](https://ultimatewirelesssolutions.com/get-a-quote)

UWS organizes these repair steps and checks with credited third-party repair resources. Source demonstrations are not a UWS technician sign-off. Follow the full source procedure for the exact variant. No repair restores a guaranteed factory seal, and replacement-part functions depend on the part and any required calibration.

Parts for this repair

### iPad Air 11-inch (M3)

Contact us to confirm the correct part, compatibility and availability for this repair.

[Check Parts Availability](https://ultimatewirelesssolutions.com/repair-parts?brand=apple&model=ipad-air-11-m3)

### Want us to do it?

Ask about iPad Air 11-inch (M3) battery replacement in Tustin. Call or text:

[949-300-8898](tel:9493008898)[Or text us](sms:9493008898)

18062 Irvine Blvd, Suite 207  
Tustin, CA 92780

### More for this iPad

[Screen Replacement →](https://ultimatewirelesssolutions.com/repair-guides/apple/ipad-air-11-m3/screen-replacement)[Charging Port Replacement →](https://ultimatewirelesssolutions.com/repair-guides/apple/ipad-air-11-m3/charge-port-replacement)[All iPad guides →](https://ultimatewirelesssolutions.com/repair-guides/ipad)

---

Ultimate Wireless Solutions · 18062 Irvine Blvd Suite 207, Tustin, CA 92780 · (949) 300-8898 · https://ultimatewirelesssolutions.com
